ABB PowerValue 6KVA G2

ABB’s PowerValue11RT is a double-conversion online UPS that guarantees up to 10kVA of clean, reliable power for your critical single-phase applications. As well as maintaining power to your servers, point-of-sale terminals, workstation clusters, routers, switches, hubs and sensitive electronic equipment, the PowerValue11RT also conditions incoming power to eliminate spikes, swells, sags, noise and harmonics.

The PowerValue11RT can be used as a standalone UPS device or installed into a standard 19″rack configuration, with connectivity options available
for each.

Three units of the 6 or 10kVA models can be configured in parallel to provide redundancy or to increase the systems total capacity up to 30 kW. All
units can be fitted with up to four battery modules to extend runtime.

SKU: PV-11RT6K Categories: ,

High reliability
• Reliable double conversion topology protects
load from all input disturbances
• Batteries can be added or replaced easily
• Reduced recovery time from discharge
• Redundant parallel operation available (6 and
10 kVA units)

Low cost of ownership
• Scalable runtime
• High operating efficiency, regardless of loading
• Reduced installation and upgrading costs
• Compact design

Flexible design
• Configurable in tower or rack-mount format
• Rotatable display
• UPS can be connected with up to four parallel
battery modules for extended runtime
• Long backup models available
• Full set of accessories and connectivity options

Efficient service concept
• Manually operated maintenance bypass switch
(optional)
• Easy set up and maintenance (plug and play)
• User-friendly display
• Hot swap user-replaceable batteries

GENERAL DATA 6kVA
Output rated power 6kVA/60
00 W
Output power factor 1.0
Topology Online double conversion
Parallel configuration Yes, up to 3 UPS
Inbuilt batteries No

INPUT
Nominal input voltage 
208/220/230/240 VAC
Input voltage tolerance 100-276 (load dependent)
Input current THDi <3% with full resistive load
Frequency range 45-55 Hz / 54-66 Hz (extendable to 40~70HZ at load < 60%)
Power factor ≥0.995

OUTPUT
Rated output voltage 
208/220/230/240 VAC
Voltage tolerance ±1% (referred to 230V)
Voltage distortion <1% linear load, <5% non linear load
Overload capacity (linear load) on inverter

10m: 102-125% load
30s: 126-150% load
500 ms: ≥ 150% load

Nominal frequency 50 or 60 Hz
Crest factor 3:1 (load supported)

EFFICIENCY
Overall system efficiency 
Up to 95%
In eco-mode Up to 98%

ENVIRONMENT
Protection rating 
IP20
Storage temperature UPS: -25°C to 60°C; Batteries: 0°C to 35°C
Operating temperature 0°C to 40°C
Relative humidity 0% to 95%
Altitude (above see level) 1000m without derating

BATTERIES
Type 
VRLA (valve regulated lead-acid)
Inbuilt batteries None – battery pack required.
Charging current 0-12 A adjustable
Recharge time (inbuilt batteries) 3h to 90%

COMMUNICATIONS
User interface 
LCD display
Optional communication cards SNMP;ModBus;AS400;Environmental monitoring sensor probe

STANDARDS
Safety 
IEC/EN 62040-1
EMC IEC/EN 62040-2
Performance IEC/EN 62040-3
Manufacturing ISO 9001:2015, ISO 14001:2015, OHSAS 18001

WEIGHT, DIMENSIONS
Weight 13.6
kg
Dimensions w x h x d 438×86.5(2U)x573mm

Power Value RT 6/10K – Brochure

Power Value RT 6/10K – User Manual

Rail Kit – (Link)

Extended battery pack (Link)

Network card – (Link)

Bypass Switch – (Link)